Product Code : 40
WHERE TO USE
Painting indoor and outdoor structures where the
substrate needs to be covered with a flexible protective
coating suitable for direct contact with water.
Protecting horizontal concrete surfaces not used for
foot traffic against contact with rainwater, such as flat
roofs waterproofed with
to chemicals and acid rain and, if suitably coloured,
reduces the absorption of sun rays and, therefore,
over-heating of the surface.
Painting architectural elements waterproofed with
to provide sufficient
protection against the sun, acid rain and atmospheric
agents in general.
Finishing off the internal surfaces of water tanks and
swimming pools waterproofed with
Mapecoat I 600 W
where the skimming layer needs to
be covered with a compatible, flexible finishing coating
in permanent contact with water.
If the external faces of swimming pools are also
waterproofed and there is no sign of infiltration,
may also be applied on
surfaces waterproofed with
Some application examples
Painting general cementitious substrates to form a
protective coat resistant to contact with water.
Painting vertical surfaces or special architectural
elements (such as domed roofs, elements particularly
exposed, covering for parapets on balconies, terraces,
etc.) after applying
Mapelastic Smartto waterproof and protect them from rainwater
No. 108, Lily Annexe, Building No. 6, Off S.V. Road, Jogeshwari West, Mumbai, Maharashtra, 400102, India